Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at

Author Topic: Need help revive vstaripcam F6836  (Read 14663 times)

  • No avatar
  • *
November 08, 2019, 06:10:45 am
i got this one gives no ip address. need uart location and firmware thank you.

  • No avatar
  • *****
November 11, 2019, 11:38:08 am
N745, so Pin 10, 11 are typically serial out.

Follow those pins from the cpu (the circle on the N745 indicates pin 1) and see where they go to.
Or use a multimeter in beep mode and buzz out those 2 pins with the socketed ones and see if they're connected anywhere.