Received this cam from dx.com
http://www.dx.com/p/my304-water-resistant-1-2-5-cmos-2-0mp-1080p-hd-ip-camera-w-4-ir-led-ir-cut-white-eu-plug-356822?Utm_rid=16222746&Utm_source=affiliate#.VKgmESusVRoUnlabeled and manufacturer was not to be found on package or "manual" either.
I'm looking for any kind of info on this camera.
There are sources that kinda say it's suppose to be HI3518 but can be HI3516C8M? too, as after some lurking with Wireshark I saw this being sent as reply to NVT client provided by package:
<wsdd:Scopes>
onvif://www.onvif.org/type/Network_Video_Transmitter
onvif://www.onvif.org/type/video_encoder
onvif://www.onvif.org/type/audio_encoder
onvif://www.onvif.org/type/ptz
onvif://www.onvif.org/b/jovision
onvif://www.onvif.org/hardware/NVT-HI3516C8M
onvif://www.onvif.org/name/HDIPC
</wsdd:Scopes>
<wsdd:XAddrs>
http://192.168.1.100/onvif/device_service
</wsdd:XAddrs>
<wsdd:MetadataVersion>
1
</wsdd:MetadataVersion>
I've tried using most of the free ONVIF-compatible clients and none can create any connection that provide video. Some client was able to discover the IP of cam but not more.
Browser interface keeps on crashing, tried with XP, 7, 8 and linux with IE, Moz, Chrome and several versions of Quicktime.
Only way to connect & configure was via the software that was provided in the box. That software, as is, has no value to me as my target is to hook this (or several of these) into zoneminder.
My first goal is to find the rtsp URI so I could stream to my setup. Then "clean" the firmware a bit so that it's not going to call home maybe.
Any bits of info are appreciated.