News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Recent Posts

Pages: [1] 2 3 ... 10
1
Hacking & Modding / Re: GRAIN 8135S CPU SDK
« Last post by djdubuque on April 15, 2018, 07:42:58 am »
I to have a CCTV camera with this chip and have noticed that the manufacture has blocked or failed to install a Web interface so that users could configure the camera settings.  I've contacted the manufacture and they refuse to help.
2
OpenWrt Wiki for Hisilicon here - https://openwrt.org/docs/hardware/soc#hisilicon

DEAD LINK
3
Site Announcements / Forum update
« Last post by admin on April 04, 2018, 07:40:37 pm »
Possibly seeing some failed hack attempts, as the settings file was getting erased blocking the site for a day or two.
Updated forum software to latest version, and will monitor for further issues.
4
Firmware / Firmware Vstarcam T6836
« Last post by vecocamacho on March 07, 2018, 01:07:18 am »
Hello, I updated my Firmware Vstarcam T6836 over the app and it got Bricked, does anyone knows where I can find the firmware (No its not on vstarcam page) and how to install over SD

I conect my camera and can get the IP adress (Does not show up in router, cam locator software or with arp -a)

Thks
5
Hacking & Modding / Start Buildroot and OpenWrt on Hisilicon SoC based devices HI35xx
« Last post by ZigFisher on February 22, 2018, 03:28:03 pm »
Hello friends !

I'm glad to inform you about the launch of the project with the creation of open firmware for IP cameras.

My OpenWrt project here - https://github.com/ZigFisher/chaos_calmer

Firmware and information (sorry, in Russian) here - https://zftlab.org/pages/2018020900.html

OpenWrt Wiki for Hisilicon here - https://openwrt.org/docs/hardware/soc#hisilicon

Enjoy !
6
General Discussion / Need help identifying this camera...
« Last post by dwc_f1 on February 13, 2018, 03:16:55 pm »
I recently purchased this camera from Amazon but need some help to get it configured and update the firmware.  The vendor has been no help.  It is a Chinese camera and the description is a "DigiHero DIY Mini Wifi Camera 1080P".  It is packaged in a white box with a green logo which says AHD Camera. 

The camera seems to boot up and works okay in P2P mode.  The camera has an internal access point and works with an Android app on my phone to configure.  When I try to connect it to my wireless router using the instructions (very poor English) the camera "reboots" to save the settings but then goes back to the defaults after the reboot.  I found that there is also an HTTP address I can use to access the camera menus, but no luck there either.  I can edit/change the settings, but when the camera saves the settings and reboots, it loses all of my changes.

Does anyone know where I can find firmware for this camera or know anything about this model?  I'm sure there are probably 20 or 30 "other name" models that are the same unit.

Thanks
7
I want to apply for forums to study and find friends.
8
In fact, the site is beneficial to the work of the group.
9
General Discussion / Re: Sannce I21AG Locking down
« Last post by Rudmar on January 26, 2018, 07:55:53 am »
Hej,
Thanks for highlighting this.
Can you please guide me how to verify this on my own camera.
Thanks
10
Firmware / Re: FIRMWARE EASYN F613 M136
« Last post by yecarrillo on January 24, 2018, 03:47:29 pm »
Arreglado el enlace en los dos post

https://mega.co.nz/#!6IIFgb5Z!4ZU9rFOBlmUP6yX0dVyxil7I4QXp-B9WG26V9N6AreM

Este es el nuevo enlace, espero que funcione

Por favor carcamonia . Podría volver a poner el archivo. Lo bajé y actualicé mis cámaras pero me faltó una y ahora no encuentro el archivo. El link de mega dejó de exisitir. Gracias.
Pages: [1] 2 3 ... 10