News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: help FTP directory  (Read 5135 times)

  • No avatar
  • *
March 13, 2014, 05:08:40 am
Hello I have got an ipcam model AP006 ( http://www.sricctv.com/en/products/speeddomeipcamera/Pan_tilt_IP_Cam_AP006.html ). It works very well, but I can’t understand this issue in the handbook ( https://drive.google.com/file/d/0B4q8LxK4lHP1WTEzRXhPR3FzLU0/edit?usp=sharing ) : Paragraph 3.5.6 "E-mail and FTP Service Settings”, as I read "FTP upload directory", but in the menu configuration of the ipcam this entry cannot be found same as the image (Figure 3.32 )in the handbook.
Can you help me and specify  the directory for the FTP upload in order to solve this problem?
I have used this program (WinHTTrack Website Copier - http://www.httrack.com ) to download the files from the cam and I have located the file ftp.html ( https://drive.google.com/file/d/0B4q8LxK4lHP1ZHowdzVKWE02b0U/edit?usp=sharing ) and I could change, but how do i replace a file in the cam?  Would it be possible that I need  change the firmware?

Regards
Gabriele

  • No avatar
  • *
April 22, 2014, 09:03:12 am
Hi, I finally solved my problem thanks to the answers of the topic "dBpower VA039K does not allow to Set FTP Directory" 

Quote
Try this URL: /set_ftp.cgi?loginuse=YOUR_ADMIN&loginpas=YOUR_PASSW&dir=YOUR_PATH_DIR

and then check ftp_dir variable on /get_params.cgi

CGI may change from version to version...if doesn't work download you CGI SDK version.

http://192.168.1.4:81/set_ftp.cgi?
loginuse=admin&loginpas=&svr=192.168.1.8&user=++++&pwd=****&dir=/falken&port=21&mode=0&upload_interval=3600&filename=6396480

  • No avatar
  • *
August 26, 2014, 08:35:54 am
Your ideas are so good clean too. I like your very last words.