Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at

Author Topic: Firmware and SSH for F-Series camera  (Read 3936 times)

  • No avatar
  • *
November 07, 2016, 02:55:48 pm
I have a IP camera F series with the default firmware.
Where can I find a compatible firmware with my camera?
As I can enable SSH connection?
I want to make some adjustments Linux operating system so I need SSH access.

  • No avatar
  • *
November 09, 2016, 09:27:06 am
My model is FS 613A M136
I know how I can restore it here
What I need is to connect via SSH Hyperterminal, Telnet ... Is it possible?
Thank you.

  • No avatar
  • *****
November 11, 2016, 09:08:37 am
Use nmap to find the ip address of the camera to see what open ports there are.
Unlikely that ssh will be enabled out of the box though, or telnet.

You'll need to find an existing firmware for the box, unpack and look at the filesystem to see what the user accounts are, and see if you can work out any logins.

I've detailed work on that in the past, look through the forum for my old posts on decrypting/unpacking firmware.

You're probably on your own though, unless its a popular camera, and someone else has also done it.

The neknek page references my own blog... hehe.

  • No avatar
  • *
November 12, 2016, 02:53:23 pm

I already know how to install SSH
But before that I need access to the linux console.
It can be accessed by hyperterminal, telnet ... to the linux console?