Author Topic: Can't connect to IP Camera (firmware by MayGion) bought on Dealextreme SKU#29014  (Read 62353 times)


  • Guest

I hope you can help me with a problem I have with an IP Camera (firmware by MayGion) that I bought from DealExtreme SKU#29014 (

The scenario I had is as follow:
  • I installed the IP Camera and connected to it through the Web UI and everything was OK.
  • The only problem was that there was no audio and there was no option in the Web UI to enable the audio.
  • I thought that upgrading the firmware would fix the problem.
  • I went to the website and downloaded firmware3.1_full.rar in order to update the firmware.
  • I extracted the RAR file, went into the Web UI and updated the UI using the www.bin file. This went OK and I was able to connect to the camera with the new UI.
  • Then, using the Web UI again, I tried to update the app using app.bin. It looked OK and UI said it is rebooting.
  • After the reboot I could not connect to the UI again! Even after searching the IP Address using the IPCamTool,exe, there was no way to connect to it (I tried to connect it directly to the router with a cable).
  • I thought that the firmware was corrupted, so I followed the instructions in
  • I was able to connect to the FTP (, but I could not make the IPCamRepair.exe connect to the IP Camera.
  • Although the IPCamRepair could not connect to the IP Camera, I cleared the content of the folders /tmp/eye/app and /tmp/eye/www as instructed and copied the files from the app.rar and www.rar using FTP.
  • After reboot I still cannot connect to the IP Camera using the UI. I can connect only using FTP. So I cannot use the camera :(
What should I do?

Thank you!


  • Guest
Have you tried this??

I got the right firmware from the guy from maygion. See attached files: upload them with ftp, default port for webpage is 81, so connect to http://IP:81 eg.

Or just look at this thread,168.15.html
« Last Edit: August 25, 2011, 04:05:45 pm by jwp123 »


  • Guest
Yes, I tried it but it did not help.

Does anyone have the original firmware of this IP Camera or maybe knows how to solve this problem?


  • Guest
Maybe try connecting via cable? I think I had some heartattack moment like that also :)
Anyways here is the link to (I believe the original firmware):
The file on firmware files inside the camera was newer, than the 3.1 firmware, so I guess it is newer that 3.1. Also the CS file is much much bigger.
Hop this helps!
BTW: do you have sound from the camera? I can just hear some noise...


  • Guest
I have the same problem here  :-[

I hope using the files of Kokesh it works.Will give it a try today.

Thanks you


  • Guest
Ok, y fixed it with the files attachedd in the other post via FTP server.


  • Guest
hello i lost the ldr file could you resend the file and the firmware thanks


  • Guest

Everything is here now since the last update of the page Maygion.

You shoud reset the device, dont use de ipcamfix, just use the ftp program at chanel 21 and use the mips firmware.Dont forget to use the correct user and password that is in the page, its not admin admin.

If you can acces via FTP you can fix the problem, i believe.


  • Guest
Thanks menesto
i try this but the always have the same ip i dont know how to reset the cam i try to push buttom 30 seg but the cam dont do nothing.

thanks a lot


  • Guest
Hi all.

Had an issue with regards to an issue of an IP-Camera that just won't start.  Even if the files in /tmp/eye/ are returned with original files.  I was dumb enough to delete the whole /tmp/eye directory.

WARNING: Do not delete folders or any other files other than those in /tmp/eye/app or /tmp/eye/www

When the /tmp/eye directory is removed instead of just the files in /tmp/eye/app or /tmp/eye/www, this creates an issue where script file (/tmp/eye/ will not have execution rights.  There is also a hidden file called "ldr".  Luckily the IP-Camera FTP seems to give files without an extension execution rights.

To resolve the issue, follow the following steps:

  • Download the ldr file from
  • Download the /tmp/eye/ file via FTP from your IP-Camera
  • Delete the /tmp/eye/ file from your IP-Camera
  • Rename the copy on local PC from to init
  • FTP the init file back to /tmp/eye/ on your IP-Camera
  • On your IP-Camera rename /tmp/eye/init to /tmp/eye/
  • Copy the ldr file from your local PC to /tmp/eye/ on your IP-Camera

Kind regards.... ;D


  • Guest
Hi all

can anyone please help with the ftp connection? I'm stuck with FW and cannot upgrade neither with IP Camera Tool nor with webUI. The other utilities don't even see the camera (talking about Master, IPCamTool, IPCamRepair).

When I scan ports the camera has port 21 open for ftp. That's OK.
When I try to connect using filezilla with suggested username: MayGion, passw: I get the classic "connected, waiting for welcome message" and then "unable to connect".
The "connected ..." message is kind of weird because I get it even with an IP address I don't have in my network.

With my limited knowledge of rocket science I've run out of ideas. Can anyone help? Thanks a lot.

Offline admin

  • Administrator
  • Sr. Member
  • *****
  • Posts: 411
    • View Profile
    • Donate to my toy fund
Can you take a photo of the board inside the camera so we can confirm what it is?


  • Guest

Offline schufti

  • Hero Member
  • *****
  • Posts: 538
    • View Profile
from what I see, this is not a maygion but a standard FOSCAM CLONE.

What is the problem with your firmware, why do you want to update?

Without knowing the manufacturer, a fw update with random files could be the last thing you do with your cam...


  • Guest
i didnt know there was more than one manufacturer of the same camera ... I bought it on dealextreme and neither the box nor the manual says who the manufacturer is ... strange

i'd like to run the UI on Mac/Safari and iPhone ... and connect the camera to Security Spy application (also on Mac)