News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: Seculink SA-IPC1200HB Camera  (Read 2492 times)

  • No avatar
  • *
May 30, 2015, 09:02:29 am
I have two of those and unable to find a webpage in this damn things to change the http port so that I can access both of them outside of the internal lan.
The onvif tool from sourceforge cannot set the port either and in the menu of the camera there is a port field which I can use but it does nothing. The ports are still 80.

Also I cannot find a webpage to just have snapshots of what the cameras see. On the ISpy site there is just one link to the jpeg file and this would be --> http://IPADDRESS/snap.jpg?JpegCam=[CHANNEL] <--
but it isn't working.

So can someone help me with changing the port and finding out the correct link to the snapshot of the camera?
« Last Edit: May 30, 2015, 09:04:28 am by drake008 »

  • No avatar
  • *
June 29, 2015, 02:22:19 am
I cannot help'actualy for the snapshot link (if not google) but for access the pages from outside it's possible :

On your ISP modem/router (box) you have to set two NAT rules :

- external port 10000, internal ip [ip of first cam], internal port (on the device) 80
- external port 10001, internal ip [ip of second cam], internal port (on the device) 80

Then from outside you will access to the webpage of the two cameras by using [your public ip]:10000 or :10001