News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Recent Posts

Pages: [1] 2 3 ... 10
1
Firmware / Re: Vimtag cloud camera B5 (F300) FH8632
« Last post by admin on February 27, 2022, 07:17:44 am »
[ 0.745329] Creating 7 MTD partitions on "spi_flash":
[ 0.750336] 0x000000000000-0x000000040000 : "bootstrap"
[ 0.758690] 0x000000040000-0x000000050000 : "uboot-env"
[ 0.763979] 0x000000050000-0x000000090000 : "uboot"
[ 0.769134] 0x000000090000-0x0000002e0000 : "kernel"
[ 0.774302] 0x0000002e0000-0x0000008e0000 : "rootfs"
[ 0.779610] 0x0000008e0000-0x000000ff0000 : "mtd"
[ 0.784504] 0x000000ff0000-0x000001000000 : "usr"


Kernel boots at least, but your flash is corrupt - rootfs

0x0000002e0000-0x0000008e0000

You'd need another copy, and try flash from uboot.   
Make sure tx is connected, uboot says its waiting for a key for 3 seconds, so should be able to get in.
2
Firmware / Vimtag cloud camera B5 (F300) FH8632
« Last post by dendulis on February 02, 2022, 08:00:34 am »
I got Vimtag Cloud Camera CPU FH8632
NOR flash XT25F128B with firmware, I guess, and small flash K24C02, where I think cam ID and e. c..  U-Boot 2010.06-svn115
Output from UART
[SPOILER]
ROM: Use nor flash.
ERR: 217
B{kӖOk


U-Boot 2010.06-svn115 (Jan 27 2019 - 04:16:25)

DRAM: 64 MiB
SF: Got idcode 0b 40 18 0b 40
use default flash ops...
In: serial
Out: serial
Err: serial
MMC: FH_MMC: 0
MMC FLASH INIT: No card on slot!
Net: set to RMII
FH EMAC
SUPPORT_SDCARD_UPGRADE
SF: Got idcode 0b 40 18 0b 40
use default flash ops...
16384 KiB default_flash at 0:0 is now current device
Card did not respond to voltage select!

** Invalid boot device **
sd card not exist
Press 4 SPACE to abort autoboot in 3 seconds
Hit any key to stop autoboot: 1
watchdog start...
actually time is:69615ms
SF: Got idcode 0b 40 18 0b 40
use default flash ops...
16384 KiB default_flash at 0:0 is now current device
## Booting kernel from Legacy Image at a1000000 ...
Image Name: Linux-3.0.8-svn204
Created: 2019-01-09 3:00:23 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2207168 Bytes = 2.1 MiB
Load Address: a0008000
Entry Point: a0008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.0.8-svn204 (root@debian) (gcc version 4.3.2 (crosstool-NG 1.19.0) ) #11 Tue Jan 8 19:00:21 PST 2019
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: FH8632
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 10160
[ 0.000000] Kernel command line: console=ttyS0,115200 mem=40M ip=192.168.121.121 root=/dev/mtdblock4 rootfstype=squashfs board=fh8630 init=/squashfs_init mtdparts=spi_flash:256k(bootstrap),64k(uboot-env),256k(uboot),2368k(kernel),6144k(rootfs),7232k(mtd),64K(usr)
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 40MB = 40MB total
[ 0.000000] Memory: 36068k/36068k available, 4892k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc3000000 - 0xfe000000 ( 944 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc2800000 ( 40 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0025000 ( 116 kB)
[ 0.000000] .text : 0xc0025000 - 0xc0413000 (4024 kB)
[ 0.000000] .data : 0xc0414000 - 0xc0439c60 ( 152 kB)
[ 0.000000] .bss : 0xc0439c84 - 0xc045fe04 ( 153 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] timer mult: 0xfa000000, timer shift: 0x16
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.182426] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)
[ 0.240100] pid_max: default: 32768 minimum: 301
[ 0.244668] Mount-cache hash table entries: 512
[ 0.249456] CPU: Testing write buffer coherency: ok
[ 0.253853] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.261486] devtmpfs: initialized
[ 0.267333] NET: Registered protocol family 16
[ 0.272894] fh8632 board init
[ 0.284766] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.288657] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.384815] bio: create slab <bio-0> at 0
[ 0.389905] fh_dmac fh_dmac.0: FH DMA Controller, 6 channels
[ 0.395456] SCSI subsystem initialized
[ 0.398582] usbcore: registered new interface driver usbfs
[ 0.402870] usbcore: registered new interface driver hub
[ 0.407504] usbcore: registered new device driver usb
[ 0.417778] cfg80211: Calling CRDA to update world regulatory domain
[ 0.424170] Switching to clocksource fh_clocksource
[ 0.430149] Switched to NOHz mode on CPU #0
[ 0.478820] NET: Registered protocol family 2
[ 0.480499] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.487667] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.494064] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.500318] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.506470] TCP reno registered
[ 0.509516] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.515245] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.521811] NET: Registered protocol family 1
[ 0.526163] RPC: Registered named UNIX socket transport module.
[ 0.531514] RPC: Registered udp transport module.
[ 0.536032] RPC: Registered tcp transport module.
[ 0.540696] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.582943] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.589312] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.594541] msgmni has been set to 70
[ 0.598446] NET: Registered protocol family 38
[ 0.600428] io scheduler noop registered (default)
[ 0.607119] fh_pwm_probe: clk_rate: 50000000
[ 0.609933] PWM driver, Number: 8, IO base ad[ 0.616116] ttyS.0: ttyS0 at MMIO 0xf0700000 (irq = 30) is a ttyS
[ 0.620345] ttyS.1: ttyS1 at MMIO 0xf0800000 (irq = 31) is a ttyS
[ 0.628210] brd: module loaded
[ 0.639845] loop: module loaded
[ 0.644989] CLK misc driver init successfully
[ 0.650819] m25p80 spi0.0: found XT25F128B, expected m25p80
[ 0.653525] m25p80 spi0.0: XT25F128B (16384 Kbytes)
[ 0.658372] DEBUG-CMDLINE-PART: parsing <256k(bootstrap),64k(uboot-env),256k(uboot),2368k(kernel),6144k(rootfs),7232k(mtd),64K(usr)>
[ 0.670039] DEBUG-CMDLINE-PART: partition 6: name <usr>, offset ffffffff, size 10000, mask flags 0
[ 0.678811] DEBUG-CMDLINE-PART: partition 5: name <mtd>, offset ffffffff, size 710000, mask flags 0
[ 0.687679] DEBUG-CMDLINE-PART: partition 4: name <rootfs>, offset ffffffff, size 600000, mask flags 0
[ 0.696810] DEBUG-CMDLINE-PART: partition 3: name <kernel>, offset ffffffff, size 250000, mask flags 0
[ 0.705900] DEBUG-CMDLINE-PART: partition 2: name <uboot>, offset ffffffff, size 40000, mask flags 0
[ 0.714861] DEBUG-CMDLINE-PART: partition 1: name <uboot-env>, offset ffffffff, size 10000, mask flags 0
[ 0.724163] DEBUG-CMDLINE-PART: partition 0: name <bootstrap>, offset ffffffff, size 40000, mask flags 0
[ 0.733465] DEBUG-CMDLINE-PART: mtdid=<spi_flash> num_parts=<7>
[ 0.739279] 7 cmdlinepart partitions found on MTD device spi_flash
[ 0.745329] Creating 7 MTD partitions on "spi_flash":
[ 0.750336] 0x000000000000-0x000000040000 : "bootstrap"
[ 0.758690] 0x000000040000-0x000000050000 : "uboot-env"
[ 0.763979] 0x000000050000-0x000000090000 : "uboot"
[ 0.769134] 0x000000090000-0x0000002e0000 : "kernel"
[ 0.774302] 0x0000002e0000-0x0000008e0000 : "rootfs"
[ 0.779610] 0x0000008e0000-0x000000ff0000 : "mtd"
[ 0.784504] 0x000000ff0000-0x000001000000 : "usr"
[ 0.793528] console [netcon0] enabled
[ 0.794331] netconsole: network logging started
[ 0.799339] resource: start=e0700000, len=00100000
[ 0.803547] base=0xc3200000 (after adjust)
[ 0.807657] fh_otg_driver_probe: mapped PA 0xe0700000 to VA 0xc3200000
[ 0.813962] pmu_reg set done:0x76203344
[ 1.018202] Core Release: 3.30a
[ 1.018504] Setting default values for core params
[ 1.223478] dma_enable :1
[ 1.223512] dma_desc_enable :1
[ 1.426583] Using Descriptor DMA mode
[ 1.427395] Periodic Transfer Interrupt Enhancement - disabled
[ 1.433108] Multiprocessor Interrupt Enhancement - disabled
[ 1.438618] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.442843] FH OTG HCD INIT (c2168840)
[ 1.446560] hcd regs before base(c3200000)
[ 1.450573] fh_otg fh_otg: FH OTG Controller
[ 1.454895] fh_otg fh_otg: new USB bus registered, assigned bus number 1
[ 1.461417] fh_otg fh_otg: irq 27, io mem 0x00000000
[ 1.466172] Init: Power Port (0)
[ 1.469558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.475954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.483110] usb usb1: Product: FH OTG Controller
[ 1.487602] usb usb1: Manufacturer: Linux 3.0.8-svn204 fh_otg_hcd
[ 1.493528] usb usb1: SerialNumber: fh_otg
[ 1.499510] hub 1-0:1.0: USB hub found
[ 1.501249] hub 1-0:1.0: 1 port detected
[ 1.506907] Initializing USB Mass Storage driver...
[ 1.510452] usbcore: registered new interface driver usb-storage
[ 1.515713] USB Mass Storage support registered.
[ 1.521778] fh_rtc fh_rtc.0: rtc core: registered rtc as rtc0
[ 1.696468] Indeed it is in host mode hprt0 = 00021501
[ 1.876306] usb 1-1: new high speed USB device number 2 using fh_otg
[ 1.879957] Indeed it is in host mode hprt0 = 00001101
[ 2.016264] ERROR: read rtc failed: 0x0
[ 2.017270] fh_rtc: probe of fh_rtc.0 failed with error -1
[ 2.023089] i2c /dev entries driver
[ 2.026657] I2C driver:
[ 2.026675] platform registration...
[ 2.031980] Clock: 15000khz, Standard-mode HCNT:LCNT = 62:74
[ 2.037807] tx fifo depth: 16, rx fifo depth: 16
[ 2.043647] I2C - (dev. name: fh_i2c - id: 0, IRQ #11
[ 2.043664] IO base addr: 0xc30b0000)
[ 2.051242] I2C driver:
[ 2.051258] platform registration...
[ 2.057132] Clock: 15000khz, Standard-mode HCNT:LCNT = 62:74
[ 2.062811] tx fifo depth: 16, rx fifo depth: 16
[ 2.070027] I2C - (dev. name: fh_i2c - id: 1, IRQ #12
[ 2.070044] IO base addr: 0xc30b8000)
[ 2.079378] card0 disconnected!
[ 2.080945] TCP cubic registered
[ 2.082835] NET: Registered protocol family 17
[ 2.087356] lib80211: common routines for IEEE802.11 drivers
[ 2.092754] Registering the dns_resolver key type
[ 2.097451] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.106520] usb 1-1: New USB device found, idVendor=0bda, idProduct=f179
[ 2.111422] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.118491] usb 1-1: Product: 802.11n
[ 2.122000] usb 1-1: Manufacturer: Realtek
[ 2.126008] usb 1-1: SerialNumber: 304A2645633A
[ 2.135184] GMAC driver:
[ 2.135203] platform registration...
[ 2.138594] using random MAC address: 1e:3c:9a:e9:79:04
[ 2.145804] fh_gmac fh_gmac.0: eth0: mixed HW and IP checksum settings.
[ 2.150349] fh_gmac fh_gmac.0: eth0: mixed no checksumming and other settings.
[ 2.157606] eth0 - (dev. name: fh_gmac - id: 0, IRQ #15
[ 2.157623] IO base addr: 0xc30d0000)
[ 2.167541] platform fh_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 2.177246] aes driver registered
[ 2.353723] gmac_rmii: probed
[ 2.354165] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active
[ 2.360644] fh_gmac fh_gmac.0: eth0: mixed HW and IP checksum settings.
[ 2.365802] fh_gmac fh_gmac.0: eth0: mixed no checksumming and other settings.
[ 2.386297] IP-Config: Guessing netmask 255.255.255.0
[ 2.388858] IP-Config: Complete:
[ 2.391631] device=eth0, addr=192.168.121.121, mask=255.255.255.0, gw=255.255.255.255,
[ 2.399572] host=192.168.121.121, domain=, nis-domain=(none),
[ 2.405626] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[ 2.420765] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 2.425039] Freeing init memory: 116K
./etc/
./etc/shadow
./etc/passwd
./etc/services
./etc/inetd.conf
./etc/profile
./etc/udhcpd.conf
./etc/host.conf
./etc/motd
./etc/group
./etc/resolv.conf
./etc/udev/
./etc/udev/udev.conf
./etc/udev/rules.d/
./etc/udev/rules.d/60-i2c-tools.rules
./etc/udev/rules.d/05-udev-early.rules
./etc/udev/rules.d/01-udev.rules
./etc/udev/rules.d/60-persistent-storage.rules
./etc/udev/rules.d/60-persistent-input.rules
./etc/udev/rules.d/95-udev-late.rules
./etc/inittab
./etc/init.d/
./etc/init.d/sbull.ko
./etc/init.d/S04env_app
./etc/init.d/S03network
./etc/init.d/verify_patch.sh
./etc/init.d/monitor_cdm_init
./etc/init.d/S01udev
./etc/init.d/S02init_rootfs
./etc/init.d/feed_dog
./etc/init.d/dev_init.sh
./etc/init.d/rcS
./etc/init.d/insmod_local.sh
./etc/TZ
./etc/mtab
./etc/issue
./etc/hosts
busybox: /linuxrc: Read-only file system
ln: /bin/linuxrc: File exists
[RCS]: /etc/init.d/S01udev
Starting udev: [ OK ]
[RCS]: /etc/init.d/S02init_rootfs
[RCS]: /etc/init.d/S03network
[RCS]: /etc/init.d/S04env_app
Setting hostname ...
[1970-01-01 08:00:03 rc.devinit] run /etc/init.d/monitor_cdm_init
[1970-01-01 08:00:03 rc.devinit] run /etc/init.d/dev_init.sh
[ 5.470037] mnvram_new: version magic '3.0.8-svn98 mod_unload modversions ARMv6 ' should be '3.0.8-svn204 mod_unload ARMv6 '
[ 5.479578] mnvram usage: insmod mnvram.ko [options]
[ 5.479598] mnvram_paddr_mode=1 [mnvram_mem_size=] :gm IPC using frammap begin phy mem
[ 5.479615] mnvram_paddr_mode=2 [mnvram_mem_size=] [mnvram_paddr] fh IPC using the designated mem
[ 5.479634] mnvram ver:1.1.1
[ 5.479643]
[ 5.504273] mnvram_paddr: 0xa3ee0000, mnvram_paddr_mode: 2, mnvram_mem_size: 64 K
[ 5.511605] crc fail when check json buf!!. /root/device_unchanged/project/src/kernel/module/mnvram/mnvram_new.c:415
[ 5.521988] nvram tv_sec: 42949502, tv_usec: 378578 !!. /root/device_unchanged/project/src/kernel/module/mnvram/mnvram_new.c:433
[ 5.533221] kernel tv_sec: 3, tv_usec: 854478 !!. /root/device_unchanged/project/src/kernel/module/mnvram/mnvram_new.c:434
[ 5.544057] uptime tv_sec: 5, tv_usec: 377857 !!. /root/device_unchanged/project/src/kernel/module/mnvram/mnvram_new.c:438
[ 5.554883] do_settimeofday !!. /root/device_unchanged/project/src/kernel/module/mnvram/mnvram_new.c:442
[ 5.564201] mnvram_init OK !!
[ 5.605623] sbull: version magic '3.0.8 mod_unload modversions ARMv6 ' should be '3.0.8-svn204 mod_unload ARMv6 '
[ 5.613935] sbull usage: insmod sbull.ko [options]
[ 5.613955] [mode=0] gm8136/gm8136 mode,using physical memory reserved by gmmem
[ 5.613973] mode=1 [hardseet_size=] [nsectors=] :using kernel memory
[ 5.613989] mode=2 paddr= psize= :using physical memory which reserved by mem= when start kernel
[ 5.614011]
[ 5.645175] phyaddr:a2800000,psize:20971520,data:c4000000
[ 5.650785] sbulla:
[ 7.356739] PHY: 0:00 - Link is Up - 100/Full
[ 19.005482] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 19.008934] SQUASHFS error: squashfs_read_data failed to read block 0x45948a
[ 19.015780] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.022055] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.028664] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.034802] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.041484] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.047672] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.054289] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.060485] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.067065] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.073202] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.079883] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.086001] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.092684] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.098873] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.105419] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.111673] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.118262] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.124402] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.131083] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.137272] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.143818] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.150074] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.156664] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.162802] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.169490] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.175672] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.182283] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.188473] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.195029] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.201273] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.207870] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.214002] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.220682] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.226874] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.233419] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.239674] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.246281] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.252403] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.259063] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.265201] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.271882] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.278073] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.284618] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.290872] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.297463] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.303602] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.310282] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.316473] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 19.323018] SQUASHFS error: Unable to read data cache entry [45948a]
[ 19.329274] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.430724] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 21.434108] SQUASHFS error: squashfs_read_data failed to read block 0x45948a
[ 21.441094] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.447301] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.453867] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.460137] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.466712] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.472845] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.479527] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.485646] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.492325] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.498516] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.505062] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.511317] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.517903] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.524045] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.530727] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.536916] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.543463] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.549715] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.556321] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.562445] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.569126] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.575245] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.581926] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.588116] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.594662] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.600916] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.607502] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.613645] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.620336] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.626517] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.633062] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.639317] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.645862] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.652116] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.658703] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.664845] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.671526] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.677717] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.684262] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.690515] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.697102] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.703245] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.709932] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.716045] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.722726] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.728916] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.735462] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.741715] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.748304] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.754446] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.774891] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.778451] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.802153] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.805616] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.814407] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.818507] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.825032] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.831285] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.837879] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.844013] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.850695] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.856884] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.863430] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.869683] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.876269] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.882413] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.889093] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.895213] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.901894] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.908083] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.914631] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.920885] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.929962] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.933617] SQUASHFS error: Unable to read page, block 45948a, size f270
mpatch_patch ok( /mnt/nfs/projec[ 21.944916] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.949233] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.956473] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.961948] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.968639] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.974744] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.981424] SQUASHFS error: Unable to read data cache entry [45948a]
[ 21.987621] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 21.994161] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.000491] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.007018] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.013144] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.019827] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.025944] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.032625] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.038815] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.045360] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.051683] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.058216] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.064344] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.071026] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.077216] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.083761] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.090013] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.096601] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.102743] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.109425] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.115544] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.122234] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.128416] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.134961] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.141215] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.147800] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.153943] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.160627] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.166821] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.173362] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.179614] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.186160] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.192415] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.199003] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.205144] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.211830] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.218027] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.224560] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.230817] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.237402] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.243543] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.250225] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.256414] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.262962] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.269214] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.275760] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.282016] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.288603] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.294744] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.301447] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.307617] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.314160] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.320414] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.327003] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.333144] SQUASHFS error: Unable to read page, block 45948a, size f270
t.tar, /mnt/nfs/project.tar, /mnt/mtd/dev_data/ipc_pack_diff ). mpatch_patch.c:467
Bus error
Bus error
[ 22.468883] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 22.472268] SQUASHFS error: squashfs_read_data failed to read block 0x45948a
[ 22.479251] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.485406] SQUASHFS error: Unable to read page, block 45948a, size f270
Bus error[ 22.495805] SQUASHFS error: Unable to read data cache entry [45948a]
[ 22.499499] SQUASHFS error: Unable to read page, block 45948a, size f270
[ 22.506538] Kernel panic - not syncing: Attempted to kill init!
[ 22.511782] Backtrace:
[ 22.514224] [<c002e86c>] (dump_backtrace+0x0/0x108) from [<c0336178>] (dump_stack+0x18/0x1c)
[ 22.522535] r6:c2023ee0 r5:00000007 r4:00000007
[ 22.527013] [<c0336160>] (dump_stack+0x0/0x1c) from [<c03361d4>] (panic+0x58/0x1a0)
[ 22.534509] [<c033617c>] (panic+0x0/0x1a0) from [<c0042c24>] (do_exit+0x5ac/0x6c8)
[ 22.541970] r3:c0420f74 r2:c2024124 r1:c2023e54 r0:c03c1aec
[ 22.547484] [<c0042678>] (do_exit+0x0/0x6c8) from [<c0042d84>] (do_group_exit+0x44/0xb8)
[ 22.555419] [<c0042d40>] (do_group_exit+0x0/0xb8) from [<c004f334>] (get_signal_to_deliver+0x1a0/0x3b0)
[ 22.564680] r4:c2022000
[ 22.567121] [<c004f194>] (get_signal_to_deliver+0x0/0x3b0) from [<c002d828>] (do_notify_resume+0xe0/0x548)
[ 22.576626] [<c002d748>] (do_notify_resume+0x0/0x548) from [<c002b0f8>] (work_pending+0x24/0x28)
[/SPOILER]

Does it means, that firmware in NOR flash broken? May be I could take a dump from XT25F128B, then erase it, and reflash with dump?
One more problem - I can't stop autoboot, stop autoboot. Combinations from log don't work. I tryed some other combinations, boot with pressed reset button - no effect.
Wrote on Vimtag support - asked for firmware, still no reply - probably due New Year hollidays in China.

May be someone have idea what to do, where take firmware? And could in u-boot to be cut-out some functions like stop autoboot, so also functions shown in first start lines in log of loading?

3
Firmware / Wanscam HW0043 latest firmware ?
« Last post by DutchGuyMikey on December 02, 2021, 12:21:57 pm »
Hello,
I have a Wanscam HW0043 but the firmware is V7.1.4.1.13-20161014.
I know it's not supported anymore, but does someone where to download a newer firmware ?
4
General Discussion / Re: Roles for females in the security industry
« Last post by evinidenk on July 30, 2021, 04:52:34 am »
I'm not sure gender really plays a role in the security field, but I would encourage you to not let your gender limit you? As long as security systems or cameras are things that you're passionate about it can be a really fun job. You can play around with different solutions to meet your customer's needs. For example one of my favorite cases is combining Axis camera+Skyrec VMS+BOSCH safety alarm and it was really rewarding to see how satisfied my client was. You can look up these companies and watch some demo videos if they have any.
5
General Discussion / Re: Dad or boyfriend who works in the security industry?
« Last post by efohnsoj on July 30, 2021, 12:05:45 am »
Yeah my boyfriend, my father, and I had a long talk one day and I think my father is much more accepting right now. After seeing the company's(skyrec) demo and listening to my boyfriend explain the work he does, my father hasn't mentioned the breakup thing for a while. He probably still has his doubts, but I don't think it'll sabotage my relationship for now haha.
6
General Discussion / Re: Need help with choosing NVR
« Last post by LucianFFSS on July 29, 2021, 11:37:21 pm »
skyrecc is really easy, check this link to see the demo video of them: https://www.youtube.com/watch?v=p8s1gOA0acY&t=14s
7
General Discussion / Re: Need VMS to detect social distance
« Last post by vamith1010 on July 29, 2021, 10:41:00 pm »
Hey OP I saw a demo video recently and thought you'd might be interested! I don't think it mentioned mask detection much, but object search functions might also be something you're looking for: https://www.youtube.com/watch?v=mWKJP0g0tzk
8
General Discussion / Re: Alternative of IVA (or powerful VMS)
« Last post by benbarton12 on July 28, 2021, 06:29:47 am »
Well I used to buy Briefcam until I realized that it's quite hard to use with other VMS. The function of Briefcam itself is impressive and all but still too pricey in my opinion. I switched to another vendor called Skyrec earlier this year and it's pretty affordable and has similar functions. You could google their website though I don't think there is much to see. They do have good reviews though.
9
My sister is teaching in senior high school. According to her, the interaction (or they call it engagement) is rather important when facing kids around 17 years old. So what they did was to put security cameras in the classroom, and analyze how often the teacher leave the black/white board area and move towards to the students. That's the one thing I remember from my last chat with my sister. If you want to know more, I can ask her.
I think I've heard of this before! A system integrator friend of mine mentioned that campus/ teacher evaluating is one of the things they do. I'll drop a link below in case you want to check if this is what you or the school have in mind. I'm not sure how the whole procedure goes but hopefully the link will give you a better idea!
https://www.skyrec.cc/#/main/solution/campus?t=1625908238773
10
General Discussion / Re: Decent security system that does behavior analytics?
« Last post by ickoodwd on July 27, 2021, 04:16:38 am »
Oh I know Briefcam and yeah their functions are nice but definitely on the more expensive side. Another brand I've heard of is SkyREC. From what I know, it consists video management software plus video analytics function, and I believe it does the function you mentioned? Their price is much more affordable too.
Pages: [1] 2 3 ... 10