CoolCam NIP-02, different versions, need help

I purchased 2 cameras off Ebay and went back and bought a 3rd. Same seller, same auction.  2 of the camera arrived and say NIP-02 on the box.  They work fine, they have the FTP upload feature and Outdoor setting that I need.

The 3rd on arrived in a different box that said IP Camera and the CD was different, it said P2P IP Cmaera. 

The 3rd camera says it is a NIP-02, but it does not show up in the IP Camera software of the other 2 cameras.

The Firmware on the 2 cameras that are working is 0.41.2.14  and the UI is  4.2.13.12

The Firmware on the 3rd camera that is not working is 81.2.0.133  and the UI is  19.2.1.2.10

I can not find the firmware or UI for either of these cameras on the web.  I looked on the  szneo.com website and there is nothing there.

I would like to try to backup one of the 2 cameras that works and try to flash the 3rd camera with the UI and Firmware from the working camera.

Not sure if this would work, but there is no setting to do that from what I can see.

Can anyone help ?  Is this 3rd camera really a NIP-02 or is it something else ?

Thanks

Bill

I was able to revive the one CoolCam, original firmware 0.41.2.47  original UI 4.2.13.12.  This will be of intrest to others:  This camera is the Foscam F18918W, and you can flash it with firmware 11.37.2.51  and UI 2.4.10.5  from Foscam. 

My other camera, the one I can not figure out what it is, I still need help ID'ing it.  It says Model:  NIP-02 P2P Black  the ID is NIP-016XXX-WRGBS  That sticker says P2P IP Camera.  I am sure this is a Foscam camera as well, but can't ID it.  The current firmware is 81.2.0.133   The current UI is   19.2.1.2.10   and it is a CoolCam from China.

Any help ?

I was able to revive the one CoolCam, original firmware 0.41.2.47  original UI 4.2.13.12.  This will be of intrest to others:  This camera is the Foscam F18918W, and you can flash it with firmware 11.37.2.51  and UI 2.4.10.5  from Foscam. 

My other camera, the one I can not figure out what it is, I still need help ID'ing it.  It says Model:  NIP-02 P2P Black  the ID is NIP-016XXX-WRGBS  That sticker says P2P IP Camera.  I am sure this is a Foscam camera as well, but can't ID it.  The current firmware is 81.2.0.133   The current UI is   19.2.1.2.10   and it is a CoolCam from China.

Any help ?

  I have just received two cameras like the one you mention you can´t figure what they are. Could you get sending email when alarm? I setup them ok and do the email test right but there is no way to make it sends email when detect alarm.
 Also the manual is very bad, and the PC app is also quite bad and has some errors when setting the camera alarm settings from it.
 The web ui is nothing similar to original Coolcam Nip-02 one, but my camera has the Neo Coolcam logo and is says NIP-02, is quite dissapointing.

Hello,
I'm a noob in Ip cam and I have a new "not branded" coolcam NIP-02.
Applications on the CD are poor quality but works more or less

Here are some information regarding Firmware :
   Device Firmware Version      81.2.0.133
   Device Embeded Web UI Version      20.2.1.2.15

The processor is a Ralink RT5350F.

As you see mine has the same FW version and a newer WebUI. This is probably a new version of Coolcam NIP-02. (with the RALINK processor)

External view : http://cjoint.com/?CKvlYFeSdVi
Rear connector view : http://cjoint.com/?CKvlY1KfoPe
Processor board : http://cjoint.com/?CKvlSBnYNcI
Board view : http://cjoint.com/?CKvlTGANAmA
JTAG : http://cjoint.com/?CKvlUBfOYxS

Do you have original Coolcam PC applications ?

I will try to upload the FW through the Jtag in the next days

We need to find which FOSCAM has this new board inside with RALINK micro

Hi, i've the same ip camera. I want to flash a new firmware for include FTP upload, i've tried to search it on coolcam site, but there is nothing...Anyway, in the case wich you are able to find a new FW, is it possible to flash it directly from the UI? Thanks

Hi,
It will be possible to flash with Windows app and Web ui. But there is no FW from coolcam today.
That's why I ask if somebody have a FOSCAM with the RALINK RT5350 processor (if it exists...)

Can you share the applications of your CD ?

If we can't find a Firmware we must understand our to change the ID of our cam with a FOSCAM ID (maybe we must modify some other parameters) to use our Coolcams with FOSCAM applications

The application of my CD are the same that you can find in the coolcam website. Anyway, is there a way for upload than 6 picture in email when alarm?

I have a "no brand" coolcam and the software is not coolcam, could you share it?

You want to send more mail than 6 or less ? I don't understand your request.
I didn't made the install / config but on another identical ip cam it works, it sends 6 photo per mail every 5 minutes

Me too, only the app for Android is the same of that of Coolcam, there is a picture with my CD

I want know if is possible to upload more than 6 image for email

Hi zioax!

Sorry if I'm OT, but I have a serious problem.
I have your same CD, but mine is damaged.
I ask you a big favor: can you make me download a copy?

I have the same cd
http://uploaded.net/file/sgvbyxti
link to the image

Is there a way for implement the FTP upload in this ip camera??

Hi, any news for firmware with FTP upload features?
Thanks

Hi I have this camera, and I found only 2 sites, that talk about nip02:
http://liken.otsoa.net/blog/?x=entry:entry140322-183809

http://customcam.blogspot.it/2013/03/ip-cam-foscam-clone-hacking-foscam-like.html

I am a newbie, so I can not understood if this link can resolve the problem. However I contacted, http://www.szneo.com
I hope to have an answer.

My problems are: I can receive any email on motion detection and input alarm short-circuited does not have any effetc.

You have pictures included here of two different camera models. Which one of the two pictures does your camera look like?

Don