News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: WebUI for Foscam Flash Size 0x200000 Bytes  (Read 8100 times)

June 16, 2011, 10:17:05 pm
Hi.

I bought an IP Camera from DX (http://www.dealextreme.com/p/standalone-ip-wireless-wifi-lan-camera-with-night-vision-and-pan-tilt-motors-26358). When trying to update, I bricked it.


W90P745 Boot Loader [ Version 1.1 $Revision: 1 $ ] Rebuilt on Aug 19 2009
Memory Size is 0x1000000 Bytes, Flash Size is 0x200000 Bytes

Now, I just recover and now i'm running FW 11.14.2.28, but no WebUI.

How can I recover the WebUI for my camera, with Flash Size 0x200000 Bytes and FW 11.14.2.28?

Thanks in advance!

  • No avatar
  • *****
June 18, 2011, 08:17:03 am
2M flash.

Try one or more of the ones in the firmware archive.

WebUI is a hidden partition.

Get into the bootloader or use the official tool for uploading - its also in the files section.

http://www.openipcam.com/files/Software/  contains the windows WebUI and Mac WebUI flasher tool.

http://www.openipcam.com/files/Firmware/ contains firmware.