Open IP Camera Forum

End User => Help => Topic started by: drewjuk on June 07, 2013, 08:20:11 am

Title: Bricked TENVIS IP602w - HELP PLEASE!!
Post by: drewjuk on June 07, 2013, 08:20:11 am
Hi,

I hope somebody can help or point me in the right direction, I upgraded to the latest firmware version provided by Tenvis, after 20mins or so the camera was still unresponsive so I gave it a reboot (:/). Now the camera is bricked and I can't get access to it, is there a way to force flash firmware over a lanport?

Thanks
Title: Re: Bricked TENVIS IP602w - HELP PLEASE!!
Post by: Malvineous on June 09, 2013, 05:34:54 am
Possibly, but only if (a) the bootloader was not reflashed and (b) you have access to the onboard serial port (UART).

There are plenty of sources around that will help you find a serial port on your device if there is one.