Open IP Camera Forum

Development => Similar Hardware => Topic started by: Rob-E on April 21, 2014, 04:40:32 pm

Title: Maginion IPC2 Aldi/Supra been flashed to some other cam with no deviceid (help)
Post by: Rob-E on April 21, 2014, 04:40:32 pm
Hi,

I bought a camera from the Aldi supermarket IPC2 same as foscam fi8904w.
Now when i came home and installed it. The software didnt recognise the cam. So i logged in to my router and then to the new
IP wich was given to the cam. Then i was shocked. No ipc2 cam or foscam fi8904w was shown but some other brand (probablyhe neo coolcam NIP-06) i think.

I attached some screens. Hope u guys can help me out recognising my cam brand and flash it.
Hopefully i can rollback the firmware to or IPC2 or Foscam Fi8904w

Please help.

Kind regards

Rob

When i log in to ip i get this,
(http://fcs.nl/wp-content/uploads/2014/04/image.jpg)

Then when i click sign in i get image on right from the panel,
(http://fcs.nl/wp-content/uploads/2014/04/image1.jpg)

When i go to settings i see the following. Hope anyone recognize it.
(http://fcs.nl/wp-content/uploads/2014/04/image2.jpg)
Title: Re: Maginion IPC2 Aldi/Supra been flashed to some other cam with no deviceid (help)
Post by: Rob-E on May 02, 2014, 06:14:20 pm
No one?
Title: Re: Maginion IPC2 Aldi/Supra been flashed to some other cam with no deviceid (help)
Post by: riefvan on October 07, 2014, 07:00:41 am
Hi

Have you found a solution? Could you please share it here. I got the same problem that my ipcam lost its deviceID after using some firmware.