Open IP Camera Forum

End User => Firmware => Topic started by: Jimmylamz on November 08, 2019, 06:10:45 am

Title: Need help revive vstaripcam F6836
Post by: Jimmylamz on November 08, 2019, 06:10:45 am
i got this one gives no ip address. need uart location and firmware thank you.
Title: Re: Need help revive vstaripcam F6836
Post by: admin on November 11, 2019, 11:38:08 am
N745, so Pin 10, 11 are typically serial out.

Follow those pins from the cpu (the circle on the N745 indicates pin 1) and see where they go to.
Or use a multimeter in beep mode and buzz out those 2 pins with the socketed ones and see if they're connected anywhere.