News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Recent Posts

Pages: [1] 2 3 ... 10
1
Wanscam HW0041-2 Two Way Audio Alarm 2 Megapixel 1080P IP Camera
I have this ip camera with firmware V6.6.8.1.1-20160310.
This comes with telnet disabled. I was able to activate telnet, but I do not know the user and the telnet password. I tried several variants, but none is good.
Please if anyone knows the user and password  for telnet to HW0041-2 Two Way Audio Alarm 2 Megapixel 1080P.
2
Wanscam HW0041-2 Two Way Audio Alarm 2 Megapixel 1080P IP Camera
I have this ip camera with firmware V6.6.8.1.1-20160310.
Please if anyone has a newer firmware. I tried at Wanscam, but no result.
3
Firmware / Re: Firmware Wansview ncs601w
« Last post by LexaMan on December 04, 2017, 01:32:06 pm »
Who fumbles in the openwrt fillings on the ip camera? Camera wansview ncs601w nadybal that type filled her openwrt http://www.wanda25.de/wansview_ncs601w.html , but it is impossible to do everything. I disassembled it, soldered contacts to the UART, the programming file filled openwrt-ramips-rt305x-ncs601W-initramfs-uImage.bin using tfttp and putty, but I can not fill in the second file openwrt-ramips-rt305x-ncs601W-squashfs-sysupgrade.bin and how to fill it I do not quite understand. Type it is written that through the web interface it is not filled because It does not work yet, and through sysupgrade too .... I used wincsp to fill it in the memory of the camera in the / tmp folder and in ssh I made the command that is written according to the instructions, like something went wrong, but then silence and like nothing did not. After the camera is restarted, this sysupgrade file disappears from the / tmp folder. Can someone tell me how to fill this file in order to move on in the instructions ?! P.S. By ip 192.168.1.1, the camera interface does not enter.
4
Firmware / Firmware Wansview ncs601w
« Last post by LexaMan on December 03, 2017, 08:15:45 am »
Can you please tell how to flash openwrt on ip camera WansView NCS601W. I have a programmer CH341A with UART.
I read that a man has pierced the camera on openwrt and it has become an ordinary ip camera. I dismantled it, connected UART, but what program to use to fill the firmware openwrt I do not know. The firmware consists of two files .bin
5
Hacking & Modding / Re: hi3518 ip cam reset! I've tried everything.
« Last post by vasycara on December 02, 2017, 02:04:55 am »
try the reset with this utility:
6
Help / Tenvis JPT3815W 2013 access point mode problem
« Last post by nikantgr76 on November 29, 2017, 01:34:59 am »
Hi,

I have some of your cameras with the following characteristics:

Tenvis JPT3815W 2013
Hardware Version    Ver 1.8
Firmware Version    Ver 1.7.24


The problem is that those cameras when connected to WiFi are creating a
hidden WiFi network that operates in 2 channels. It is probably an
access point mode.

Is there any way to disable this? I want them to only function as clients.
7
uCLinux / Re: Fix KRACK ATTACK in ARM Linux
« Last post by admin on November 23, 2017, 11:29:43 pm »
wpa_supplicant version 2.4 and above is affected, so replace that.

That said I'm not actually sure that the version on the camera is vulnerable, it might actually be too old.
8
uCLinux / Fix KRACK ATTACK in ARM Linux
« Last post by AR84 on November 22, 2017, 07:20:26 am »
Hi guys,

I would like to fix the KRACK Bug in the Linux running on the IP cameras.
In my case the camera is running Linux version 2.6.28

Does anyone know which of the files inside the Linux needs to be modified to solve the KRACK vulnerablility?

Any ideas would be welcome.

Thanks in advance.
9
General Discussion / Better Software To Connect With Foscam Clone?
« Last post by abrogard on November 19, 2017, 05:10:27 am »

 I have a couple of Foscam clones and they came from different vendors.

 One of them has no 'advanced' option or any other way of changing the configuration.

  So how did I get it set up in the first place?

  ah, good question.  Well I think it came with its own software for finding it and talking to it.

  I've lost that now.  Can't find it.

  Anyone got any idea of how I could perhaps get at this camera and reconfigure it for our new local network which uses the 10.x.x.x  series instead of the 198.x.x.x  ?

10
General Discussion / How To Log Contacam Into a Foscam Clone?
« Last post by abrogard on November 19, 2017, 05:06:58 am »

 My Contacam won't log in to my foscam clone and I think it probably because of that second menu thing that it throws up - asking what mode you want, for IE or Firefox or Mobile.

 Is there any way to deal with this and use Contacam with a clone?
Pages: [1] 2 3 ... 10