News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: help finding serial  (Read 3247 times)

  • No avatar
  • *
July 11, 2014, 06:05:19 am
Hey
I could use some help finding the serialconsole connections for this camera.
Modelname is Vansxe V-W611
The board is very similar to others here on the forum, with a Hi3518 chip,  but have not managed to find anything.
Attached is two pictures of the board
The four connections on the lower right where i have marked one as GND gives nothing.
The first two measures 0v, then GND and last one is 12v.

And the top two connections right next to the Hi3518 measures 3.3v but kermit stays silent.

Halp!

  • No avatar
  • *
April 23, 2015, 09:28:03 am
Hi,

The four red cables in the upper left corner are GND - TX - RX - VCC. It seems to be like mine. The serial settings are 115200 8 N 1.

Good luck.