Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at

Author Topic: model easyN fs-613b-m166 (b613m136xa pcb)  (Read 15179 times)

  • No avatar
  • *
June 20, 2014, 08:47:15 pm
 :-\      it's apparently e-waste at this point.. thanks again for the help schufti

  • No avatar
  • *****
June 21, 2014, 07:03:44 pm
As far as i remember the cam should get detected during kernel startup, right after usb initialization and loading ip stack. Some time ago easyn had a webpage offering fw for download. I don't know what they are up to now. Some time ago someone (graham?) mentioned they are referring to foscam for downloads nowadays...
Did they at least ack the cam is their product?

  • No avatar
  • *
June 21, 2014, 08:25:22 pm
They didn't say much really, just that they couldn't help me with it.

I did mention that I needed to load it via serial though.. I also have written back and requested a full firmware package. no response yet..       ???

  • No avatar
  • *
May 12, 2019, 06:01:18 am
Hi, have you tested the PCB yet? Does it work fine?
Im going to use your Gerber files to order a real PCB so I need to ask for your confirmation first.
Anyway, have a good day