News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: Wanscam Clone-WEBUI unpack  (Read 6043 times)

  • No avatar
  • *
December 19, 2013, 05:24:43 am
Hi

I have problem with unpacking the WEBUI on my camera.
Model is RTX IP-26..Looks like a Wanscam Clone.
http://www.kameryip.cz/obrazky_dalsi/1_1374055524-hd-kamera-ip-26.jpg

I try win_fostarn, but no good luck.
Please can look at it someone more competent?

Thank you!

  • No avatar
  • *****
January 14, 2014, 05:02:46 am
Hi,
this doesn't look like a "compatible" webui to me or maybe it's a broken file.

  • No avatar
  • *
January 14, 2014, 09:36:12 pm
check whether the IP address is right, or negotiate with the seller.

  • No avatar
  • *
February 21, 2014, 03:38:31 am
Hi...I haven´t problem with load the new firmware to camera.
I try unpack the web_ui and make some changes with it.
In Foscam cam isn´t problem make it.
But if i try use same proceed like Foscam (use win_fostarn to firmware files),that not work..
Thanks for any advice..

  • No avatar
  • *****
February 24, 2014, 02:00:38 am
as I already wrote above: the format is not compatible with win_fostarn