News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: Restoring web UI  (Read 3115 times)

  • No avatar
  • *
November 16, 2013, 11:41:01 am
I made a typo while flashing a romfs.bin and overwrote some of my web UI files. I have a FI8918W. I found several web UI bin files in the downloads, but how do I know which one I need for my camera, and how do I put it onto the unit?
I have soldered leads onto the camera and have a serial connection and UART adapter.

Many Thanks

  • No avatar
  • *****
November 18, 2013, 02:11:03 am
Hi,
for the choice of webui only the size really matters. Given it's really a foscam they most likely have 4MB so you don't have to care. But hey, why not use an original foscam one for a start ???
Just use the camfinder utility to flash the webui. Or use this method.
You can also flash it via serial connection, just look at any of the various flashing recipies in the forum...