News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: Bricked TENVIS IP602w - HELP PLEASE!!  (Read 3028 times)

June 07, 2013, 08:20:11 am
Hi,

I hope somebody can help or point me in the right direction, I upgraded to the latest firmware version provided by Tenvis, after 20mins or so the camera was still unresponsive so I gave it a reboot (:/). Now the camera is bricked and I can't get access to it, is there a way to force flash firmware over a lanport?

Thanks

  • **
June 09, 2013, 05:34:54 am
Possibly, but only if (a) the bootloader was not reflashed and (b) you have access to the onboard serial port (UART).

There are plenty of sources around that will help you find a serial port on your device if there is one.