News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: [HELP] IP-CAMERA-002A (Maygion) help!  (Read 8524 times)

June 01, 2013, 12:08:32 pm
well, I am stupid enough...anyway my is winbond version, so I download the
http://www.maygion.com/downloads/20100908/firmware3.1_full.rar

my was V3.1 but dated is older (I think) so I decdied to update the app.bin file first, guess what, I can't access the webUI after, and repair tools can't find it, and no connection to FTP (192.168.1.111)

my router = 192.168.1.1 & 255.255.255.0
PC = 192.168.1.3
still nothing, even on DHCP list

I even use ipscanner and still don't see anything

any help?

  • **
June 02, 2013, 01:36:40 am
Nope - if the MayGion repair tool can't find it, then you've reached a point that nobody has yet been able to get past.

Chances are the bootloader is still working, but without access to the serial port there's no way you can use it to perform a recovery.  JTAG isn't an option either as nobody has found the JTAG pins yet.

June 10, 2013, 05:56:10 pm
i have done the same mistake but my ftp is still accessible.
use IPCamRepair.exe to recover your cam.

I still try to recover but i can't find original firmware for : IP-CAMERA-ID002A