Author Topic: Firmware Recovery - method #2  (Read 118303 times)

Offline it_aint

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Firmware Recovery - method #2
« Reply #120 on: October 14, 2015, 04:11:13 pm »
Does anyone know the pin out for a F19810 Also can you use hyperterminal I here the free version doesn't work well
I'm just transferring a good firmware from a good cam and put it in the bad one if everything goes well I have read and read a little help would be appreciated don't want 2 dead cams I have ordered a PL-2303TA USB Download Cable

                                                         it_aint 
« Last Edit: October 14, 2015, 04:15:40 pm by it_aint »

Offline cyril4u

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Firmware Recovery - method #2
« Reply #121 on: December 06, 2015, 04:17:14 pm »
Hello

I am looking for the pinout for FI9816P PCB

I tried to locate where is the TX/RX but Nothing is written on the PCB  :-[

Does anyone know about this board ?

Thanks for your help
« Last Edit: December 13, 2015, 04:50:35 am by cyril4u »

Offline miky_boy

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Firmware Recovery - method #2
« Reply #122 on: July 23, 2017, 07:40:07 pm »
Hi guys,

Trying to recover my IP Cam using the serial port i accidently deleted my bootloader.

Anybody cam help me to recever the  u-boot please?

Now when i connect the IP Cam nothing happens on Serial Port :(

regards