News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: New life to Unitoptek PTZ Dome Camera with HI3516C chip  (Read 1647 times)

  • No avatar
  • *
January 22, 2018, 07:20:37 am
Hi,

As many other here, I also bricked my camera by flashing wrong firmware. Is there any method to unbrick the camera? Wifi seems working but it losts camera's id, so now it's called just IPCAM- instead of IPCAM-1234D

Camera I bought is this below
https://www.aliexpress.com/item/Full-HD-1080p-960P-PTZ-Wireless-Speed-Dome-IP-Camera-Wifi-Outdoor-Security-CCTV-2-8/32826343757.html

I'm thinking to buy serial console Recovery cable from ebay and try to connect to pins with it. Pins I think are in right top corner in photo below
https://photos.app.goo.gl/xdkJsd32ZsBpNNYX2

Or is there any chip for ptz camera I could buy and replace that original one? No luck after finding for same motherboard.
« Last Edit: January 22, 2018, 07:22:32 am by sukkis »