News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: [REQUEST] Firmware for IPCC-B13L 960P 1.3MP (Hi3518 + AR0130)  (Read 1206 times)

  • No avatar
  • *
April 15, 2017, 02:09:15 pm
Hello,

I'm looking for the firmware of an IPCC-B13L 960P 1.3MP (Hi3518 + AR0130).
The manufacturer does not have the firmware for this camera at their support page.

The camera has two boards, one with the Hi3518 chip and one with the CCD sensor and schould be an Aptiva AR0130 CCD sensor.

The CCD board have the description: CCD_CAM_8M-142(A)
After searching I can not find anything about CCD CAM 8M-142.

At WebIF I could see Hard Ver: 7100-ar0130_960P
The firmware I had on this was: V2.0.6.1-X20-Build:20130928D

I have bricked the camera due to flashing a wrong firmware :-[

Does anybody knows if the whole firmware is located in the flash chip 25L12835F ?

Any help is welcome!
« Last Edit: April 15, 2017, 02:49:55 pm by G33RT »

  • No avatar
  • *
April 26, 2017, 07:17:43 pm
I'm still busy to get this camera running again.

I found out that the IPS-HA1312L use also the same hardware Hi3518C + AR0130.

A nice guy from another forum was so friendly to provide the firmware.

I still have yet to test as my camera was flashed with a wrong firmware and got bricked.

Now I have to fine a way to flash the flash-chip with an compatible camera flash-dump and re-program my flash chip.