Author Topic: Wanscam HW0043 Help  (Read 1451 times)

Offline tdwhbp

  • Newbie
  • *
  • Posts: 2
    • View Profile
Wanscam HW0043 Help
« on: November 03, 2016, 07:18:58 am »
I need some hwlp before I brick all my cams I have 3 Wanscam HW0043 indoor outdoor cameras I changed the username /passwords on one cam. in attempting to do the 2nd I locked my self out of the camera stock username / password does not work and the one I tried to change it to does not work any Ideas on how I can regain access?

I would also like to update firmware with something I can see and tweak the interface a bit. but 1st things 1st.

help with access... I run linux(ubuntu) and window

TDW

Offline tdwhbp

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Wanscam HW0043 Help
« Reply #1 on: November 03, 2016, 07:55:03 am »
Still interested in how to Mod cams and change from stock FW. but Good news is I gained access to my camera.
I had a ID10T user error and did not put a letter I thought I did when setting my username. this error has been corrected.

TDW