News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: Foscam F19821W stop working after upgrading  (Read 3096 times)

  • No avatar
  • *
December 06, 2015, 06:16:38 pm
I have 2 Foscam F19821w not V2 one constantly rebooting and the other fail after upgrading.
I am using a usb serial converter 3.3v to access the camera but i do not know what to do after that with all the data.

Here is the Full Boot:


U-Boot 1.1.4 (Apr 8 2009 - 11:41:01)

U-Boot code: E0500000 -> E0517540 BSS: -> E051E2BC
HI_VERSION=U_BOOT_1_1_4-M08C0305B0301 @Hi3511v110_OSDrv_1_0_0_7 20
09-03-18 20:44:35
RAM Configuration:
Bank #0: e0000000 128 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
MAC: 00-25-07-00-00-3B
Hit any key to stop autoboot: 0
## Booting image at 34100000 ...
Image Name: hilinux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3711332 Bytes = 3.5 MB
Load Address: e0a00000
Entry Point: e0a00000
OK
initrd_start 0x 0,initrd_end 0x 0
Starting kernel ...

Uncompressing Linux...............................................
................. done, booting the kernel.
Kernel Early-Debug on Level 5
Linux version 2.6.14-hi3511v100dmeb-less-release (foscam@ubuntu) (
gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #8 Thu
Sep 20 15:22:18 CST 2012
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
Machine: Hi3511v100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 se
ts
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128
sets
Built 1 zonelists
Kernel command line: mem=64M console=ttyAMA0,115200 initrd=0xE1A
00000,0x400000 mtdparts=phys_mapped_flash:1M(boot),5M(kernel),10
M(jffs2)
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 58624KB available (1752K code, 211K data, 80K init)
Mount-cache hash table entries: 512
HI_VERSION=LINUX_2_6_14-M05C0303B0103 @Hi3511v110_OSDrv_1_0_0_1
2008-11-03 18:33:31
CPU: Testing write buffer coherency: ok
checking if image is initramfs... it is
Freeing initrd memory: 4096K
NET: Registered protocol family 16
Hisilicon clock system V0.01
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Serial: AMBA PL011 UART driver
ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011
io scheduler noop registered
RAMDISK driver initialized: 4 RAM disks of 20480K size 1024 bloc
ksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
PPP generic driver version 2.4.2
NET: Registered protocol family 24
physmap flash device: 4000000 at 34000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assu
ming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code bro
kenness.
3 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 3 MTD partitions on "phys_mapped_flash":
0x00000000-0x00100000 : "boot"
0x00100000-0x00600000 : "kernel"
0x00600000-0x01000000 : "jffs2"
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing init memory: 80K
init started: BusyBox v1.1.2 (2008.11.03-10:24+0000) multi-call
binary

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ _/ / / \_/ \_ ______
___________\___\__________________

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S80network
[RCS]: /etc/init.d/S90init
Generic PHY: Registered new driver
HIETHV100-M03C0301 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:36:17

Hisilicon ETHv100 net controler.
Hisilicon ETHv100 MDIO Bus: probed
Invalid HW-MAC Address: 00:00:00:00:00:00
Set Random MAC address: 22:C6:7A:A0:15:31
HIGPIO-MDC030001 @Hi3511v110_OSDrv_1_0_0_1 2012-07-04 19:35:42
------------------reg=9357897------------
GPIO_I2C-MDC030001 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:42

GPIO_I2C2-MDC030001 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:4
2
ptz_init start ptz_state[1],HorPos[0],VerPos[0]
setup ptz gpio success
ptz_init end ptz_state[1],HorPos[-1],VerPos[-1],flag[0]
pcf8563 driver init successful!
hm1375 [hm1375_device_init ,1046]: init hm1375 error
hm1375 [hm1375_init ,1085]: hm1375 device init fail,deregister i
t!
insmod: cannot insert `/mnt/mtd/app/modules/hm_1375.ko': Operati
on not permitted (-1): Operation not permitted
ov2643 [ov2643_device_init ,574]: init ov2643 error
ov2643 [ov2643_init ,614]: ov2643 device init fail,deregister it
!
insmod: cannot insert `/mnt/mtd/app/modules/ov_2643.ko': Operati
on not permitted (-1): Operation not permitted
sha204 [sha204_init ,300]: sha204 driver init successful!
HIDMAC-MDC030002 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:12
SDIO-M05C0302 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:18
SDIO-M05C0302 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:18
Card stack initializing, please wait ...........................
.....

No card connected.
Check card stack end,now you can do your job....................
..
usbcore: Unknown symbol pci_enable_device
usbcore: Unknown symbol pci_set_master
usbcore: Unknown symbol pci_disable_device
insmod: cannot insert `/lib/modules/2.6.14-hi3511v100dmeb-less-r
elease/kernel/drivers/usb/core/usbcore.ko': Unknown symbol in mo
dule (-1): No such file or directory
modprobe: failed to load module usbcore
usbcore: Unknown symbol pci_enable_device
usbcore: Unknown symbol pci_set_master
usbcore: Unknown symbol pci_disable_device
insmod: cannot insert `/lib/modules/2.6.14-hi3511v100dmeb-less-r
elease/kernel/drivers/usb/core/usbcore.ko': Unknown symbol in mo
dule (-1): No such file or directory
USB1_1-M0001C030002 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:1
5
Clock to USB host has been enabled
hisilicon-ohci hisilicon-ohci.0: hisilicon OHCI
hisilicon-ohci hisilicon-ohci.0: new USB bus registered, assigne
d bus number 1
hisilicon-ohci hisilicon-ohci.0: irq 20, io mem 0xa0000000
usb usb1: Product: hisilicon OHCI
usb usb1: Manufacturer: Linux 2.6.14-hi3511v100dmeb-less-release
ohci_hcd
usb usb1: SerialNumber: hisilicon
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=5 sec
(nowayout= 0, nodeamon= 0)
HISI_WDT-MDC030001 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35:52
<6>HISI_WDT-MDC030001 @Hi3511v110_OSDrv_1_0_0_1 2008-11-03 18:35
:52
usb 1-1: new full speed USB device using hisilicon-ohci and addr
ess 2
usb 1-1: Product: 802.11 n WLAN
usb 1-1: Manufacturer: Ralink
usb 1-1: SerialNumber: 1.0
tar: /mnt/mtd/app/z_bin.tar.gz: No such file or directory
cp: /bin/cgi-bin/*: No such file or directory
cp: /bin/lighttpd-1.4.30-hi: No such file or directory
insmod tlv_320aic31 OK!
insmod rtutil3070sta OK!
rt3070sta: module license 'unspecified' taints kernel.
insmod rt3070sta OK!
rtusb init rt3070STA --->
===>rt2870_probe()!
--> RTMPAllocAdapterBlock
packet> data offset = 136
packet> len offset = 88
packet> cb offset = 48


=== pAd = cc901000, size = 530144 ===

--> RTMPAllocTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
NumEndpoints=7
BULK IN MaxPacketSize = 64
EP address = 0x81
BULK OUT MaxPacketSize = 64
EP address = 0x 1
BULK OUT MaxPacketSize = 64
EP address = 0x 2
BULK OUT MaxPacketSize = 64
EP address = 0x 3
BULK OUT MaxPacketSize = 64
EP address = 0x 4
BULK OUT MaxPacketSize = 64
EP address = 0x 5
BULK OUT MaxPacketSize = 64
EP address = 0x 6
STA Driver version-2.5.0.3
NVM is EFUSE
Allocate a net device with private data size=0!
The name of the new ra interface is ra0...
RtmpOSNetDevAttach()--->
<---RtmpOSNetDevAttach(), ret=0
<===rt2870_probe()!
usbcore: registered new driver rt3070STA
insmod rtnet3070sta OK!
TDE_MAIN_VERSION[v1.0.0.1] Build Time[Nov 4 2008, 09:15:32]
TDE_ADP_VERSION[hi3511 adp v1.0.0.3] Build Time[Nov 4 2008, 09:
15:32]
insmod tde OK!
load succcessed!
Hisilicon UMAP device driver interface: v1.00
insmod hi3511_base OK!
Chip Version: Hi35110110
insmod hi3511_sys OK!
insmod hi3511_viu OK!
insmod hi3511_dsu OK!
load vpp.ko ....OK!
insmod hi3511_vpp OK!
insmod hi3511_venc OK!
insmod hi3511_group OK!
load vdec.ko ....OK
insmod hi3511_vdec OK!
load md.ko....OK!
insmod hi3511_md OK!
insmod hi3511_sio OK!
insmod hi3511_ai OK!
insmod hi3511_ao OK!
insmod hi3511_chnl OK!
insmod hi3511_h264e OK!
insmod hi3511_jpege OK!
load succcessed!
Hisilicon Media Memory Zone Manager
/mnt/mtd/boot.sh: /mnt/mtd/boot.sh: 81: /bin/MsgServer: not foun
d
/mnt/mtd/boot.sh: /mnt/mtd/boot.sh: 82: /bin/watchdog: not found

Auto login as root ...
Nov 19 09:42:29 login[315]: root login on `<NULL>0'



BusyBox v1.1.2 (2008.11.03-10:24+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

[1;32mWelcome to HiLinux.[0;39m
None of nfsroot found in cmdline.
~ $



Is somebody have instruction to recover these camera ?

Normand