News:

Registered a URL and setup a forum as the IPCam stuff really needed its own site vs my irregular blog posts about IPCam hacking at http://www.computersolutions.cn/blog

Author Topic: Submitting new Firmware  (Read 48420 times)

  • No avatar
  • *****
June 18, 2011, 08:30:18 am
New Firmware can be submitted by PM'ing me, or replying to this thread so I know where to download it from.

Lets try to be helpful in how we dump firmware, and make it as easy as possible for others to restore.

So..

Firmware should consist of split files where possible.


Linux.zip
Romfs.img
WebUI.img

Make a notes file listing the file locations in memory, and their executable location.
ls -al  in the bootloader is enough for that.
Also note if its for a 4M flash, or a 2M flash device.

If you really want to be nice, add a page in the wiki with a boot log, and /dev /proc listings  ;D
I'll upload the ones I get onto the files section so we have an archive.

Lawrence.

December 08, 2011, 01:13:34 pm
hi!
Foscam 8903/8905W  FI8903W.04W.05W-11.15.2.17-recovery.rar
http://www.sendspace.com/file/t1sk4r
linux.bin
romfs.img
images.txt:
7 linux.bin 0x7F020000 0x00008000 -acxz
6 romfs.img 0x7F0E0000 0x7F0E0000 -a
cutted & tested yesterday :)


December 10, 2011, 04:24:42 am
hi!

Wanscam lr_cmos_0_37_2_38.bin + 复件 中性-0.9.4.11-C116.bin
http://www.sendspace.com/file/ra0980


  • No avatar
  • *****
December 26, 2011, 06:07:51 pm

May 10, 2012, 05:39:27 pm
CoolCam


0.2.9.12.bin http://www.sendspace.com/file/5a4ym0
lr_cmos_0_41_2_46.bin http://www.sendspace.com/file/3sgw8u

This is the latest firmware, the best that I have tested so far :)
My camera came with a WebUI that did not worked fine with Chrome. Now it does :D

May 24, 2012, 06:34:52 pm
CoolCam


0.2.9.12.bin http://www.sendspace.com/file/5a4ym0
lr_cmos_0_41_2_46.bin http://www.sendspace.com/file/3sgw8u

This is the latest firmware, the best that I have tested so far :)
My camera came with a WebUI that did not worked fine with Chrome. Now it does :D

is this for the Wanscam AJ-C2WA-C118?

May 25, 2012, 07:03:57 pm
is this for the Wanscam AJ-C2WA-C118?

I honestly don't know if it would work. You should try it (after making a backup)

  • No avatar
  • *
October 08, 2012, 08:35:48 pm
Firmware of the EasyN FS-613B-M1661 obtained from their support agent 08/10/2012
Firmware Version      4.37.2.43
WebInterface Version  4.5.3.46(telnet) or F-E-A1-A-A3(interface)

Tested working fine.
« Last Edit: October 08, 2012, 09:35:25 pm by keeper »

December 18, 2012, 11:47:21 am
hei, the suggested firmware and webui working fine and restored also the wifi ip cam function after wrong foscam firmware update...thanks a lot

  • No avatar
  • *
October 18, 2017, 12:12:49 pm
Hello i need a new firmware of my wanscam hw0021, actually i have this firmware 67.2.65.18 and this web ui 9.0.21.46. Thank you.