News:

Re-organized the forum to more cleanly delineate the development section, as the end user support side appears to have taken a life of its own!

Author Topic: Foscam/Wanscam clone identity  (Read 4005 times)

  • No avatar
  • *
March 31, 2015, 03:53:38 am
Hi all!
I bought an ip camera recently and after doing some research online, I know it's some sort of clone from Foscam or Wanscam. My question is if any developers here can identify which make and model it is cloned from because I would like to hack/mod from the resources provided on this site. Here are the specs and name I found from the camera and box:

XXCamera (IP_Camera_XXC-50100-H)

Specifications   
- Image Compression Format   : H.264
- Image Resolution   : D1(720 X 576)/VGA(640x480)/QVGA(320x240)
- Memory   : Max. up to 32G TF card
- Sensors   : 1/4" CMOS Sensor
- Audio Compression Format   : G.726
- Video Frame Rate   : 25 Frames /sec.
- Audio   : Support One Way Audio Output
- Ethernet   : One 10/100Mbps RJ-45
- Support Protocol   : HTTP,FTP,TCP/IP,UDP,SMTP,DHCP,PPPoE,DDNS,UPnP
- Wireless Standard   : IEEE 802.11b/g
- Pan/Tilt Angle   : Horizontal: 350° & Veritcal: 120°
- Infrared Light   : 11 IR LEDs, Night Visibility Up to 10 meters
- Alarm Input   : 2 channel input
- Alarm Output   : 2 channel output
- Power Supply   : DC 12V/1A
- Power Consumption   :

  • No avatar
  • *
April 19, 2015, 04:09:49 pm
I have a similar camera I purchased online. The specs are the same with an id XXC-xxxxxx-xxxxxx. The cam is labelled VCATCH. Did you have any luck tracking down firmware or further info about the camera?

  • No avatar
  • *
June 29, 2015, 08:49:26 am
what do you want to know?  I can help you contact me.